M/S Galcier Traders / Steel Industry - Lahore

We are a Dealer of Pakistan Steel Mill Corp. The largest industrial unit in Pakistan. We have the following Products for our clients 1. BILLETS / BLOOMS a) Prime i ) All Grades including SAE 1006, except SUP Series, or as specified below:- 150 x 150mm 125 x 125mm 100 x 100 / 105 x 105mm 90 x 90 / 80 x80 / 75 x 75mm 65 x 65 / 50 x 50 mm ii) Bloom iii) Grade SUP 6 & 7 100 x 100 mm 75 x 75 mm iv) Grade SUP 9 100 x 100 mm 75 x 75 mm b) Secondary Billet i) Prices of All Secondary/Rejected/Off grade/OCB Billets will be Rs. 500 PMT less than the price of Prime Billets for respective profile and grade. ii) Grade charges will not apply on Secondary/Rejected/Off grade/OCB Billets. Extra Charges for special grades of Billets/Ingot Square a) ASTM A-615, G-60 (Rolled) & NSSR 3,500 b) ASTM A-615 G-60 (Cast), ASTM A-572 G-50 & G-40 (Rolled) 3,100 c) ASTM A-615 G-75 2,800 d) WR-20 and above, SAE 1018, A2AL, SS A 21 2,000 e) ASTM A 706 4,500 f) SAE 1008,1010,WR-8 2,500 2. HOT ROLLED PRODUCTS a) Hot Rolled Coils - Prime (Mill Edge) i) All grades except Grade-SG 26/255, Lloyds Grade 'A', Upto 2 mm x 1000 / 1220 Over 2.00 to 2.35 x 1000 / 1220 Over 2.35 to 2.65 x 1000 / 1220 Over 2.65 to 3.00 x 1000/1220 Over 3.00 to 3.65 x 1000/1220 Over 3.65 to 5.00 x 1000/1220/1500 Over 5.00 to 6.00 x 1000/1220/1500 Over 6.00 mm and above Note: 1 Pickled and Pickled & Oiled charges @ Rs 2,500/- PMT shall be applicable over and above the prices of respective size & grade of Prime Quality and Secondary-A material only. 2 Prices of all Secondary-A Hot Rolled Products shall be charged @ 1% below the respective thickness-wise prices of Prime Quality Grade HR-1. 3 Prices of Secondary-B Hot Rolled Products shall be charged @7% less than the prices of Prime (Grade HR-1) Products in respective dimension and year of manufacture. 4 Extras charges irrespective of year of manufacture: a) For Grades: i) 5LB 500 ii) X-42 to X-46 2,000 iii) X-52/X-56/X-60/X-65 (PSL-2) 5,000 iv) X-52/X-56/X-60/X-65 (PSL-1) 3,000 v) X-70 8,100 vi) RST37-2Cu/1543 & RST52-3/1543 8,600 vii) SG-26/255 2,000 viii) SAPH-440 6,700 ix) Lloyd's Grade A 7,600 b) For Shearing 300 c) For Slitting 1,425 d) Additional charges for special services to M/s.BWL 4,750 b) Chequered Material (in all grades & thicknesses) Tear Drop Pattern Prime Upto 2.8 mm Over 2.8 Upto 3.00 mm Over 3.00 mm Note: 1 Prices of all secondary A Chequered Material (in all grade & thickness)shall be charged @1% below the respective thickness wise prices. 2 Prices of all secondary B Chequered Material (in all grade & thickness)shall be charged @4% below the respective thickness wise prices. c) M.S. Slabs Mixed grade & thicknesses irrespective of year of manufacture Prime Slab (Pin Hole) HR-1 Slab (Pin Hole) CR-1 Short length (1-2 M) 48,500 Rejected/Axial crack/LFC/6000 mm Rejected Slab <3000 mm Extra charges : for any specific grade other than mixed grade 1,000 d) MS Thick Plates (in all grades irrespective of year of manufacture) Upto 29 mm Over 29 Upto 49 mm Over 49 Upto 64 mm Over 64 Upto 99 mm Over 99 mm 3. COLD ROLLED PRODUCTS a) Cold Rolled Coils - Prime i) All grades except SPCEN. Upto 0.55 mm x 915 / 1220 / 950 Over 0.55 to 0.60 x 915 / 1220 / 950 Over 0.60 to 0.65 x 915 / 1220 / 950 Over 0.65 to 0.70 x 915 / 1220 / 950 Over 0.70 to 0.75 x 915 / 1220 / 950 Over 0.75 to 0.80 x 915 / 1220 / 950 Over 0.80 to 0.90 x 915 / 1220 / 950 Over 0.90 to 1.00 x 915 / 1220 / 950 Over 1.00 to 1.20 x 915 / 1220 / 950 Over 1.20 to 1.6 x 915 / 1220 / 950 Over 1.6 to 1.8 x 915/ 1220 / 950 Over 1.8 mm and above Note: 1 Prices of Prime Quality Un-annealed Cold Rolled Products will be@ Rs. 500/= PMT less than the prices of Prime Quality Cold Rolled Products. 2 Prices of Prime Quality Cold Rolled Products(annealed/unannealed) weight less than 2.00 M. Ton shall be charged @ 1% below the respective thickness-wise prices of prime quality in the specific grade 3 Prices of all Secondary-A Cold Rolled products annealed/unannealed shall be charged @ 1% below the respective thickness-wise prices of Prime quality Grade CR-1. 4 Prices of Secondary-A Cold Rolled products annealed/unannealed weight less than 2.00 MTN shall be charged @ 2% below the respective thickness-wise prices of prime quality Grade CR-1. 5 Prices of Secondary-B Cold Rolled Products annealed/unannealed shall be charged @7% less than the prices of Prime(Grade CR-1) Products in respective dimension and year of manufacture. 6 Extras charges irrespective of year of manufacture: a) for Grades i) SPCEN 5,500 ii) RST-12.03-Cu3 6,000 iii) CR3 500 iv) CR4 1,000 b) for Shearing 600 c) for Slitting 2,000 4. GALVANISED PRODUCTS a) Galvanised Coils -Prime (all grades) Upto 0.55 x 915 / 950 / 1220 Over 0.55 & Upto 0.60 x 915 / 950 / 1220 Over 0.60 & Upto 0.65 x 915 / 950 / 1220 Over 0.65 & Upto 0.70 x 915 / 950 / 1220 Over 0.70 & Upto 0.75 x 915 / 950 / 1220 Over 0.75 & Upto 0.80 x 915 / 950 / 1220 Over 0.80 & Upto 0.85 x 915 / 950 / 1220 Over 0.85 & Upto 0.90 x 915 / 950 / 1220 Over 0.90 & Upto 1.00 x 915 / 950 / 1220 Over 1.00 & Upto 1.5 x 915 / 950 / 1220 Over 1.5 mm Note: 1 Prices of Prime Quality Galvanized Products weight less than, 2.00 M. Ton, shall be charged @ 1% below the respective thickness-wise prices of prime quality in the specific grade. 2 Prices of all Secondary-A Galvanised products shall be charged @ 2% below the respective thickness-wise prices of Prime quality Grade G-01. 3 Prices of all Secondary-A Galvanised product weight less than 2.00 MTN shall be charged @ 4% below the respective thickness-wise prices of prime quality Grade-G-01. 4 Prices of Secondary-B Galvanized Products shall be charged @ 10 % less than the prices of Prime (Grade G-01) Products in respective dimension and year of manufacture. 5. UNSORTED PRODUCTS Product Code a) HR 954 Un-sorted End Cuts (HR) 956 Rejected HR Sheet Un-sorted 957 Un-sorted Rej. HR Sheet (P&O) 958 Un-Sorted Rej. HR Chq. Sheet b) CR 951 Un-sorted End Cuts (CR.A) 952 Un-sorted End Cuts (CR.T) 953 Un-sorted End Cuts (CR U) 961 Un-sorted Annealed Coil 962 Un-sorted Temper Coil 964 Un-sorted Un-Annealed Coil 965 Un-sorted Rej. C.R. Sheet c) GP 955 Un-sorted End Cuts (GP) 963 Un-sorted GP Coil 6. BY -PRODUCTS (a) Pig Iron CPI ( All types incl. imported) CPI (off grade/CPI-S) FPI - 5 / 6 / 5S / 6S / 5HMn / 6HMn/ HSi/ Off Grade FPI - 4 / 4S / 4HMn FPI - 3 / 3S / 3HMn FPI - 2 / 2S / 2HMn FPI - 1 / 1S / 1HMn Pig Iron Residue Pig Iron (Dust) Pig Iron Disc Scrap (b) Hard Coke 1.1 Coke Dust ( 0 - 1 mm ) Bulk in Loose form 1.2 Coke Dust ( 0 - 1 mm ) Packed in 50 kg Bags 2. Coke Breeze (0 - 10 mm) 3. Coke Breeze (0 - 15 mm) 4. Coke Breeze ( 0 - 20 mm ) 5. Coke Breeze ( 0 - 25 mm ) 6. Coke 25mm to 80mm (Subject to availbility) 7. Coke Over 80mm Note: Extra charges @ Rs. 200/- PMT for allowing hand picking of Coke size +80mm by labours/workers deployed by the buyers on their account shall be payable at the time of obtaining Delivery Order(s). (c) Ammonium Sulphate Bulk: in loose form Packed: in 50 kg bags (d) Coal Tar (e) HSD (Used) (f) Slag Granulated BF Boulder Slag (BF waste: Product Code: 906) Convertor Slag Boulder Slag alongwith HMLR contents (g) Oxygen/Nitrogen (in Cu.m.) (h) HMLR (i) Runner Scrap (j) Steel Metal Ladle Residue (SMLR) Scrap (k) Steel Scrap Retrieved from Converter Slag i. 0-60mm ii. 05-60mm iii. 30-60mm iv. 60-300mm v. Over 300mm (l) Tar Bonded Dolomite (TBD) Bricks (In all grades/sizes/shapes) 34,000 (m) Chamote Powder i. 0-3mm ii. 0-20mm (n) Tundish Well Block CN-42 (o) Bricks Fire Clay in all sizes & Shapes (p) i. Calcined Dolomite (Dead Burnt Dolomite) ii. Calcined Lime (Burnt Lime) Size 0-10 mm iii. Calcined Lime (Burnt Lime) Size 10-50 mm (q) Mortar (r) Burnt Refractory Bricks (Mixed) (s) Bulk Hot Metal Skull
Get all the information about M/S Galcier Traders / Steel Industry Lahore Pakistan dealing in Steel Sheets,Steel Re-Rolling,Scrap,Other Steel Products,Iron Products